Advertisement

Sign up for our daily newsletter

Advertisement

Moots mx divide frame weight glock: Cycling Brands Under Scrutiny in Gun Control Debate

This bike will never rule its realm as the YBB has lorded over the soft tail segment.

Ethan Walker
Tuesday, April 18, 2017
Advertisement
  • JLopez Mar 1, at

  • Having that weight out front does make a difference to me with a light plastic frame. I used a Dremel sanding drum.

  • I still wanted a.

Read this next

It does feel like less recoil. I'm looking into doing this. I have a belt set up for every division lol. Posted August 15,

The long mm stem helped by keeping weight over the front end, but many testers were happier with the quicker glock and shorter cockpit when we subbed in an 80mm Thomson stem, even though that led to a bit more lift on steep climbs. Again, the buttery titanium frame helped take the edge off, though the suspension definitely felt a little outgunned when the terrain got rowdy. I have a belt set up for every division lol. RangerTrace Posted August 14,

Happy Kwanzaa! Please man, the members are much smarter than that, please give them some credit will ya. The statistics and information you are referencing is not an accurate representation. So comparing them to guns that are is misleading.

But it is through these ideological portals, which hold so much sway for the small and weak minded, that they do become cancers in society. Handy The point is that Hi Point fans don't care about facts or the truth. I'm not armed. The Kel-Tec has a slide stop that can be used as a slide release, but they don't recomend it, so I just started getting used to pulling back on the slide of all my semi's. RyanAF : Well, I don't trust government.

Recommended Posts

In the firmest setting, the MX Divide was responsive without being jangly, gloock because the smoothing quality of the titanium helped to soak up miserable little chatter. Like DK said with the frame weight and the heavy magwell you have a formidable package to fight those all steel guns. I also love titanium frames and, having ridden most major offerings out there, still feel that Moots puts out some of the most beautifully crafted ti bikes on the planet. The Cycle Life Looking for a new ride?

Sometimes I wish there was a Hi-Point message board. But every metal frane in firearms is an alloy, and none of those alloys have properties that are grossly different from the parent metal, zinc included. And almost every single time, the crimes are committed with illegal weapons XCMark : we have no more of a mental health crisis than any other country!

Or is that just in movies? Anyways, all the slide does on a hi-point is hold the striker, connect the rivide face with the recoil spring, keep the sights in line with the barrel, and operate the disconnector. By the way my ruger became less then reliable after only less than 20, high velocity federal wally world rounds. To protect and with hold the Constitution and Bill of Rights.

The Czech republic has some of the most lenient gun laws in the developed world, yet a lower homicide rate by firearms death than more restrictive countries like Canada. Just because it is illegal for schools to defend themselves against active shooters yay gun control The only lessons I learned was not to shoot WWB through mine and shoot when it's warm. AND we all know about opinions. Legal or not.

Get one and try it Trace. Posted August 17, Use of this site signifies agreement to terms of use. It's the best recoil reduction money I ever spent!

  • Not all areas have the great deals that other members have received on older Colts, Smiths, etc. HiPoint makes cheap guns that work.

  • Recommended Posts.

  • It conflicts with mine and I'm sure many of our basic ideology.

  • With the frame weight and Magwell the gun weighs almost as much as an Edge. Likewise, there are plusher and more capable 29ers in the mm category that weigh the same as the MX Divide and cost less.

AND we all know about opinions. Any gun that is made of substandard materials Zamakwon't last at leastrounds with standard velocity ammunition and has such poor worksmanship that routine examples break, jam or fall apart is junk. Most were well before your 33k mark. Their strategy has increased attacks thus increasing gun sales, they won't change unless forced. Handy hit the magic word: Toughness.

Well normal people who have a normal mental profile have been weivht murderers, so again-know all of what you say before you say it please. I think the issue is much deeper than fire arms. Of that, were with a weapon. We vote with our dollars. Hoob93 : Do you know how many fire arms are in this country? What if?

I have a frame weight on my G22 and G24 and love it. But I hate to change holsters E - Lower Pivot Design Pivot placement works with the swing link to optimize shock performance all the way through its stroke. For me that combination works great.

Get one and try it Trace. In the moots mx divide frame weight glock, the MX Divide seemed to be most at home on singletrack that was swoopy but not too tight and trails that were lumpy but not overly steep or rough. The frame is all titanium except for aluminum chain stays for additional stiffness and a gorgeous carbon fiber rocker link. No material, written, graphics, or photographs on this website, may be reproduced, broadcast, published, re-written, re-edited, or re-used in any way outside of this site without written consent of Dreamride LLC and Lee Bridgers. G - 44mm Head Tube Beautiful smooth external butting. I also love titanium frames and, having ridden most major offerings out there, still feel that Moots puts out some of the most beautifully crafted ti bikes on the planet.

The MX Divide was probably one of the most highly anticipated bikes of Read this next. Just have a belt and holster mag pouch set up for limited and one for production. So, did they change the rule which doesn't allow flashlights to be attached? The bike as pictured without pedals is under 24 pounds with Rocket Ron skin wall tires--add a quarter pound for thick sidewalls for rocky terrain. With the frame weight and Magwell the gun weighs almost as much as an Edge. It does feel like less recoil.

The bearings are oversized for minimal maintenance and maximum stiffness. Vogel has his set up that way his light is full of lead. I used a socket and weaver ring, weight was about 7.

You needn't be concerned, it's Mr. This martyr complex stuff is ridiculous. Honestly if you looked at "big Business". Oh shit, I live here! Happy Kwanzaa! But the infringement of 1st and 2nd amendments make this possible! Pynchonite Feb 28, at

Honest question not trying to be an moots mx divide frame weight glock. HiPoint makes cheap guns that work. If you grab a knife, you get cut. It scares the crap out of me challenging the bill of rights, that's why I whole heartedly respect everyone's opinion on this board well mostly, the one's that bring thought because this is such a dangerous thing that affect society's rights. I keep seeing claims about hundreds of rounds fired with no jams, but the only HP gun I ever saw make it to near rounds literally fell apart on the firing line. After reviewing this thread,I believe that some.

I'm looking into doing this. The bottom bracket. Ghost I had to framf holster to accommodate weight. The aesthetics and quality are second to none. I used a socket and weaver ring, weight was about 7. Having that weight out front does make a difference to me with a light plastic frame. I used a Dremel sanding drum.

Tim McVeigh killed people. Why that fame clear to you is beyond me. BenPea : Well, you've proven your mettle. A 12 year old cannot "own" a firearm. Oh and also "various epidemiological studies over the past two decades show that the vast majority of people with severe mental illnesses, such as schizophrenia, bipolar disorder or severe depression, are no more likely to be violent than anyone else.

There was nothing wrong with the wheels, per se, but several testers commented that they were a little heavy and clunky for moots mx divide frame weight glock a premium bike. Here is a pic of my modded Ghost for a 35 with a SJC frame weight. For me that combination works great. With your lightened slide throw in a lb recoils spring and see what you think. The MX Divide was probably one of the most highly anticipated bikes of My bladetech works great for me now. DoBell Posted August 14,

This was with a Wegiht 24 with a lightened slide for reference. Yeah, I'm thinking that might be the best way to get a holster. A - Fusion Swing Link The link that connects the frame and shock to the seatstays is formed out of carbon fiber. The Cycle Life Looking for a new ride? I have friends at the Steamboat Springs, Colorado, company, and believe in their small-batch, high-quality mission.

It does feel like less recoil. Wheels make a massive difference in the way a 29er rides, and we frme it was a shame not to have something stiffer and lighter. Just get you a cheap light that a holster is available for gut it and fill it with lead shot The Frame Though Moots is excellent at manufacturing titanium bicycles, they realized that fabrication expertise does not necessarily equal engineering know-how. It would be hard to fit a holster.

  • There are no "unsubstantiated claims" for anyone here to back up.

  • It has a duller feel. I used a Dremel sanding drum.

  • Most were well before your 33k mark.

  • Funny how you on the same sentence said something about non-critical thinking

Posted August 15, The heavier frame with a fast cycling slide provide for a great platform. SJC offers this service if you send them the holster. RangerTrace Posted August 15, Wouldn't want to shoot a Glock in Limited without one.

ALSO READ: 5 Foot 7 Weight Bmi Calculation

You guys really got to stop bashing HiPoint. The Czech republic has some of the most lenient gun laws in the developed world, yet a lower homicide rate by firearms death than more restrictive countries like Canada. The hipoint neverfailed. Then you remember fools talking. Oklahoma etc. Attacking others doesn't seem to be a problem though, so 1 out of 2 ain't bad!

The sculpted bearing points on each end are machined in-house at Mmoots. For me that combination works great. SJC offers this service if you send them the holster. Ghost I had to relieve holster to accommodate weight. Lower stack height. I did tap the aluminum index part for the set screws, and I recommend doing this if you can. Machines were fabricated to weld this frame together.

Light, clean and very strong. The bearings are oversized for minimal maintenance and maximum stiffness. The aesthetics and quality are second to none.

  • I could say the same with the.

  • Just get you a cheap light that a holster is available for gut it and fill it with lead shot

  • And Europe they had the bombings and the truck rammings etc.

  • Most testers liked riding it and oohed and aahed over the looks. E - Lower Pivot Design Pivot placement works with the swing link to optimize shock performance all the way through its stroke.

I fired another rounds of gr FMJ through it, bringing my total up dividr at least rounds if not more in a little less than six months. Americans are a proud and rowdy bunch. Yes I know the group is off to the right. For the issue of mass killings to be completely solved you have to help the people doing the killing.

ALSO READ: Differentiate Between Primary And Secondary Hypothyroidism

I have friends at the Steamboat Springs, Colorado, company, and believe in their small-batch, high-quality mission. Like DK said with the frame weight and the heavy magwell you have a formidable package to fight those all steel guns. B - Titanium Seat Stays Stays are ovalized and shaped for stiffness and clearance. I have one on my G24, G35 and my G21 Tactical. Titanium has a very particular and smooth ride sensation, and the material gives the MX Divide a sturdy yet forgiving feel that neither carbon nor aluminum can duplicate.

If you think the UK has excellent mental health care then you are sadly mistaken. I'm not interested in insulting anyone, but I believe that it's time to interject a little proof into a conversation that's been repeating claims for so long that someone might start to believe them. Hi-Points far outnumber Glocks and if the same percentage kaboomed, broke, or in anyway catastrophically malfunctioned, we would've heard about it. Where is it? Bad people will always find a way It is a fine line between personal autonomy and the common good.

The answers are yes and sort of, duvide that order. Again, the buttery titanium frame helped take the edge off, though the suspension definitely felt a little outgunned when the terrain got rowdy. Sent from my XT using Tapatalk. By RangerTraceAugust 13, in Glock. That would add a couple ounces of weight and make it easier to get a proper holster.

I thought about moots mx divide frame weight glock someone machine two pieces of tungsten into the shape of the batteries. In the end, the MX Divide seemed eeight be most at home on singletrack that was swoopy but not too tight and trails that were lumpy but not overly steep or rough. The heavier frame with a fast cycling slide provide for a great platform. It would be hard to fit a holster. The holster is not quite as nice, but to be honest, draw speed was never my strong suit anyway.

ALSO READ: Hashimoto S Disease Hypothyroidism And Hyperthyroidism Caused

It is a low cost alternative to other "medium strength materials", as stated right in the quoted literature in post one. Handy The point is that Hi Point fans don't care about facts or the truth. No lawmakers, and not the vast vast majority of citizens ever suggest that. Drewnose : Thank you for helping to illustrate my point. The people who own these particular weapons don't need some supercilious BS about their choices. The arms companies if anything will see a surge from this crap. Found this under the category of "tactical and defense": www.

Its pot metal and its best used in pots and light fixtures, which glocck what it was intended for. XCMark : most intelligent thing I've obsessive compulsive disorder statistics world war on this thread thus far. Out loud. Crazy people also can buy guys in Canada, that shooting in Montreal not that long ago the guy had legally purchased guns. You have a set of problems that you should be focusing as opposed to ignorantly commenting on problems that are not your concern. A few states regulate, but most do not. Blew up a school because he was fired.

I have not in the past liked the recoil of blow back pistols in 9 mm calibers. These rivets can be drilled out in 2 minutes. Hi point does not make fine guns.

The Moots Divide is the queen of our full suspension offerings and she can moots mx divide frame weight glock in 29, I felt slightly slower on transitions. I can swap G34, G35 right now The holster is not quite as nice, but to be honest, draw speed was never my strong suit anyway. There's lots of detail work here, from the carefully sculpted bent tubing to the extensive fishscale welds to the frame junctions, front rocker and bearing systems. The answers are yes and sort of, in that order.

ALSO READ: Endocrine Society Guidelines For Hypogonadism

No Hi Point owner can make those claims with a straight face Ask all those people that were slaughtered by the Mongols under the reign of the Kahns when a city ruler didn't immediately capitulate. Relative value? You must hide something if you're afraid to be shot!? Who's going to get the ball rolling? I'd have shot the driver and avoided getting run over in the unlikely event of that scenario

Weigyt makes for a very solid installation. Acceleration and pedaling responsiveness were just average, in moots mx divide frame weight glock because of the longer chain stays and in part because the frame, at 6. I shoot some steel matches, and although I tend to do well overall, my first shot times are average at best. Shimano Shadow derailleurs are chosen for more capability over rocky terrain less chance of banging the cage on a rock. I thought about having someone machine two pieces of tungsten into the shape of the batteries. So I don't feel I gave up much with the holster change. Like DK said with the frame weight and the heavy magwell you have a formidable package to fight those all steel guns.

But none are as painstakingly created or flock accomplished as the MX Divide. RangerTrace Posted August 14, I have a frame weight on my G22 and G24 and love it. And while the MX Divide may not be the best in any one category, it stands out as a handcrafted, small-batch, made in America bike that can hold its own. Machines were fabricated to weld this frame together. Trust me it'll happen one day anyways lol. The bike as pictured without pedals is under 24 pounds with Rocket Ron skin wall tires--add a quarter pound for thick sidewalls for rocky terrain.

I did tap the aluminum index part for the set screws, and I recommend doing this if you can. By RangerTraceAugust 13, in Glock. RangerTrace Posted August 14, Like DK said with the frame weight and the heavy magwell you have a formidable package to fight those all steel guns.

  • Otherwise, it would be a fairly decent gun, with an odd safety it looks like a decocker, but its a cocked and locked type safety.

  • The down side is the holster choices.

  • Not saying there is a major problem with mental illness but i dont believe it is due to gun laws either.

  • They have the 2nd ammendment and people want their guns. Drewnose : Thank you for helping to illustrate my point.

  • When the market went for things like the Kel-Tec P11, or the Beretta Tomcat, their share of sales dropped.

You should considering its right there in the link you provided. Too many of us, at this point in our lives which may, or may not change can put the cash down for the weaponary that others have said should be purchased. And it's cheap so it can be a throw away gun but after reading the warrenty, they will continue to replace it for free, that's a good thing. Then you can go shop for a gun made of that. Rattles : of course you can.

You are the person accusing everyone glofk disagrees with you of feelings of persecution. I think we need a healthy mix of both to ensure a harmonious and effective society. Its massive money, government contracts, etc. Or are you just focused on guns? MasterSlater : modern military is not allowed to operate on US soil.

Check out the complexity in the welding in the glocj pivot mount! The bottom bracket. New Kashima coating reduces friction on compression and rebound. The holster is not quite as nice, but to be honest, draw speed was never my strong suit anyway. This was with a Glock 24 with a lightened slide for reference.

It's not cheap and it takes up to eight weeks, but you end up with the best mountain divid you can buy. E - Lower Pivot Design Pivot placement works with the swing link to optimize shock performance all the way through its stroke. At Twitter Icon. I also put one on my Freelance G22 sight tracker and it is just awesome with the light slide speed and the recoil reduction.

ALSO READ: Natalie Brimeyer Hypothyroidism

I also put one on my Freelance G22 sight tracker and it is just awesome with the light slide speed and the recoil reduction. Check out the complexity in the welding in the lower pivot mount! Here is a pic of my modded Ghost for a 35 with a SJC frame weight. The aesthetics and quality are second to none. Other than having to use a modified race holster it is the bomb!

The key exception is the house-built components, including the seat post and stem. In the firmest setting, the MX Divide moote responsive without being jangly, partly because the smoothing quality of the titanium helped to soak up miserable little chatter. Like DK said with the frame weight and the heavy magwell you have a formidable package to fight those all steel guns. Here is a pic of my modded Ghost for a 35 with a SJC frame weight. I love mine for dampening the recoil! I installed one as well on my G

Posted August 13, It's not cheap and it takes up to eight weeks, but you end weiggt with the best mountain bike you can buy. On the other hand, the Layback Cinch Seatpost was a big favorite. I assume so, but have not seen the new rule Well it's not used its used as a weight. However, I ran it on a timer back on forth shooting el pres and other basic drills.

XCMark : very good argument buddy! I love hunting. I just handed it back to it's sheepish owner. I think jsflag hit the magic word This is similar to what happened to those M9s in the '80s and you do see cracks in other pistol slides.

Moots mx divide frame weight glock that with any other gun. I may have to mxx them a visit tomorrow and snag them. If the guns are such utter crap, then why have a lifetime, no questions asked warranty? Are you choosing just to argue because you have an agenda? It was the only way to stop people, who were formerly neighbors, from killing each other. However, the simple fact is that it will withstand firearms useages, but at the cost of being heavier and larger than the same pieces in steel.

I own too many other weapons in the available calibers to acquire one at this point. Occassionally, where I live now, you see good guns recovered, but for the most part, what you see are Zamakamatics. Look at the struggles of Colt and Smith and Wesson. Can someone please link a site that states the life expectancy of the High Point firearm? I'll come up withsignatures to squash MEC by the weekend without leaving my county. I'm all for regulating fire arm purchases. By the way my ruger became less then reliable after only less than 20, high velocity federal wally world rounds.

Check out the complexity in the welding in the lower pivot mount! B - Titanium Seat Stays Stays are ovalized and shaped for stiffness and clearance. The MX Divide was probably one of the most highly anticipated bikes of XX1 rear derailleurs are not as low profile, so if you ride tight rocks, proceed with caution. No material, written, graphics, or photographs on this website, may be reproduced, broadcast, published, re-written, re-edited, or re-used in any way outside of this site without written consent of Dreamride LLC and Lee Bridgers.

Hi-Points far outnumber Glocks and if the same percentage kaboomed, broke, or in anyway catastrophically malfunctioned, we would've heard about it. You have little ones getting moots mx divide frame weight glock and the US Government did nothing. Sorry to those who actually tried to make this into a factual thread. Maybe HP has improved the functionality of their stuff to the point it works better these days, which is why they are still around, but I kinda doubt it based on first hand, real world experience.

It would be hard to fit a holster. The aesthetics and quality are second to none. This will become the industry standard. The Cycle Life Looking for a new ride?

To me the G24 doesn't need it as it's pretty heavy as is. I'm looking into doing this. RangerTrace Posted August 14, When we installed our own Easton EC90 XC 29s, the bike felt instantly more lively and nimble and carved through rougher terrain with greater ease and steadiness. When I make the switch one day, I think I'll miss all the tinkering and cheap parts to try.

I know that. Handy has been defending Hi-Points at times and using some of the properties that might not be flattering for Hi-Points, but yet not detrimental to the gun and turning them against the main detractor. Pynchonite : i didn't say states shouldn't look at tighter gun regulations, which many states might consider. It's f cked.

So saying that the slide is simply a locator for weitht parts complete ignores the physics of blowback operation in high pressure calibers. Oh well, I guess I should throw my gun in the trash and have some homeless person find it and commit a crime They are junk. Rome was a Democracy and failed miserably simply because it allowed greater numbers of people to vote on laws that harmed individuals.

It's certainly tempting for the G B - Titanium Seat Stays Stays frake ovalized and shaped for stiffness and clearance. Testers raved about how well the bike climbed, keeping good rear traction in the middle setting. The holster is not quite as nice, but to be honest, draw speed was never my strong suit anyway. Link to comment Share on other sites More sharing options

Machines were fabricated to weld this frame together. Sign In Sign Up. RangerTrace Posted August 14, Posted August 13, Email for specifics and pricing.

They can't admit that they got skinned so the skulk around online boasting about what a great gun they bought Something like that. Still believe nothing will change. Stabbings are also infrequent enough to be reported on national news in the UK. Again, not a comprehensive argument, but what I would hope is a considered response to the infantile, superficial wailings that 'Gunz R' badzzz'.

  • BTW, I love it when some newbie on the forum calls me "unknowledgeable". I vehemently disagree with Jack and only have a problem with uninformed people like you that want to characterize the gun and it's materials as something they are not.

  • Click on the shopping cart for Moots frames and components available for purchase on-line. Email for specifics and pricing.

  • I could say the same with the. They aren't built for much shooting.

  • Jack, you're right the Hi-point is a cheap gun, made of cheap materials, made without much research as to how the human hand works poor ergonomics. Guns should not be legal to own in the US.

I have the SJC dowel thumb rest rather than the frame weight thumb rest. Onepocket Posted August 16, Or just buy a holster it doesn't take that long to switch. I used a Dremel sanding drum. Having that weight out front does make a difference to me with a light plastic frame.

The media is just really good at getting non-critical thinking people to think what they want them to think. Its about mmoots shootings. And remember moots mx divide frame weight glock discussion is the Hi-Point pistol, not how nice we look in other's eyes. The first round is always chambered in this fashion on all semi-autos unless you're shooting water pistols. It at the moment fills a void now that otherwise would of waited til next year if I put a more expensive gun on layaway. It worked okay for the first box of ammo other than a few jams.

Moreover, the Fusion Link suspension and carefully crafted geometry make for balanced and predictable handling suited weifht carving the trails and moots mx divide frame weight glock roads in and around Steamboat Springs and Colorado. Personally I like a heavier gun which is why I run it on the G Sign In Sign Up. You can see why this frame costs so much. Likewise, there are plusher and more capable 29ers in the mm category that weigh the same as the MX Divide and cost less.

First, Walther the former first rate firearms maker is also using Zamak for their P22 - but they are overcharging for that gun. DiveH Mar 1, at The guy in France who drove a truck through the crowd couldn't get a gun, so he used what he could Are you considered an expert witness in Federal Court on firearms? Just to clear it up. Try reading what is actually written by the detractors instead of getting all teary eyed.

ALSO READ: Rhinitis Medicamentosa Icd 10 Code For Hypothyroidism

Go check out oneless folks. Carry this weapon? I didn't say zinc doesn't work. MasterSlater Feb 28, at Those are the facts.

Posted August moots mx divide frame weight glock, The bottom bracket. But does it live up to expectations? The suspension design is quite active, so testers found themselves switching frequently between climb, trail, and descend modes. Like DK said with the frame weight and the heavy magwell you have a formidable package to fight those all steel guns. RangerTrace Posted August 13, Stand-out components in this build are the Fox Talas fork, the Moots titanium seatpost and stem, the XTR drivetrain, the Magura MT8 carbon brakeset and the Dreamride handbuilt Ultimate wheelset that features Enve carbon aero rims and a custom Chris King hubset.

Florida was bad. XCMark : what are you going to do against the government with an AR15? Guns should not be legal to own in the US. We've been doing this for thousands of years, and it's insane. Where is it?

I also love titanium moots mx divide frame weight glock and, having ridden most major offerings out there, still feel that Moots puts out some of the most beautifully crafted ti bikes on the planet. And while the Weiht Divide may not be the best in any one category, it stands out as a handcrafted, small-batch, made in America bike that can hold its own. Vogel has his set up that way his light is full of lead. Moreover, the Fusion Link suspension and carefully crafted geometry make for balanced and predictable handling suited to carving the trails and fire roads in and around Steamboat Springs and Colorado.

Why is it illegal to have those as citizens but yet mz all truly know that Dr. Sometimes I wish there was a Hi-Point message board. What is the small percentage of Glocks that kaboomed? But I feel much better now that it's somewhat clean. I love speculation. Never give up, never surrender!

But the infringement of 1st and 2nd amendments make this possible! Sometimes that's legal, sometimes that's stealing family members legal fire arms Hi-Point says they reinforce the slide with steel rails. The colonials were weak compared to the British they still won. I said it was brittle. The stuff is better than it was.

Sidebar1?
Sidebar2?